Stationary Refrigeration

Whether manufacturing a new product or retro-fitting an existing unit, our VIPs offer energy savings in wall thicknesses never before possible. At an R40 per inch specification it would take approximately 6 to 7 inches of traditional insulation wall thickness to equal the VIP's 1 inch thermal efficiency.

Some of the many benefits of using our VIPs are as follows:
  • Reduced energy consumption
  • Reduced weight
  • Shorter compressor runtimes
  • Better temperature distribution
  • Smaller unit "foot print"
  • Faster pulldown
The typical wall thickness of a residential refrigerator is 50 mm (2"). The graph below illustrates the effect on thermal conductivity (U) by adding varying thicknesses of VIPs. A 25 mm (1") VIP reduces the heat gain by a factor of 4!

Whether your application is for residential, commercial or cold storage, our VIPs offer environmentally friendly, revolutionary thermal performance at a fraction of the space required by traditional insulations.

Primary Business Address
3721 Spirit Drive SE | Albuquerque, NM 87106
Phone: 505-224-9373 | Fax: 505-224-9376
European Business Address
The Factory, Rectory Lane | Brimfield, Shropshire, UK SY8 4NX
Phone: 0044 (0) 1584 711 333 | Fax: 0044 (0) 1584 711 838 |

Site designed by