Thermal management issues arise as the performance and density of electronics continues to increase. There are three primary needs with regard to thermal management and electronics:

• Electronics operating in non-ambient conditions

• Electronics with a high degree of sensitivity to temperatures

• Electronics with a lifetime that varies as a function of temperatures (batteries)

Shrinking dimensions and increased demand for thermal stability require even higher performance insulation. Kevothermal™ based insulation products can be an excellent solution to these issues and others arising in today's electronics.

Because our products offer thermal conductivities 12 times lower than fiberglass and 7 times lower than foam-based insulation, thermal performance is increased and insulation volume can be drastically reduced. VIPs for electronics can be produced with dimensions as small as 40mm x 40mm x 3mm, with smaller panels possible if the specific application warrants.

Electronics image

Primary Business Address
3721 Spirit Drive SE | Albuquerque, NM 87106
Phone: 505-224-9373 | Fax: 505-224-9376
European Business Address
The Factory, Rectory Lane | Brimfield, Shropshire, UK SY8 4NX
Phone: 0044 (0) 1584 711 333 | Fax: 0044 (0) 1584 711 838
info@kevothermal.eu | www.kevothermal.eu

Site designed by idu1.com